Ecolat rolled Brown - 10M x 14CM x 0.7CM - ECOO pond edging

The aim is to obtain a perfectly horizontal pond edge and to see a minimum of liner. This can be achieved by using Ecolat® slats from ECOO.

Also paths, lawns, flowerbeds and vegetable gardens can be designed in the same way with Ecolat® edging.

For curved shapes, the Ecolat® border is available on 25 or 10 m rolls. It is flexible and ideal for free shapes. For rectilinear pools it is available as a straight slat 2 or 3 m long.
The Ecolat® slats are fixed using Ecopic stakes with H profile. They are easy to drive into the ground and maintain great stability.

Benefits:

• Eco-friendly: made from 100% recycled plastic waste
• Product made in Belgium
• Rot-proof: very long lifespan
• Roll-fold version: ideal for round shapes (not suitable for straight edges)
• Straight slatted version: ideal for straight and refined shapes
• Easy to transport (rolls)
• Lightweight and easy to handle
• Suitable for edging paths, lawns, flowerbeds, vegetable gardens and ponds
• Fixing by Ecopic stakes ensures high level of stability

Easy installation:

POND EDGE SCHOOL

For a beautiful pond edge, it is important to position the Ecolat® slat perfectly horizontal. In particular, it determines the water level.

1. Drive the Ecopic stakes into the ground and secure the Ecolat slat against the stakes.
2. Place a protective felt in the pond and on the Ecolat® border. This felt protects the liner from anything sharp in the ground.
3. Then place the pond liner on the edge and finish properly on the outside.

ECOLAT BORDER

Partially buried, Ecolat is firmly fixed in the ground using Ecopic stakes.

1. Lay Ecolat where the border will finally be placed. The Ecolat roll will then unfold. When laying, follow the undulations of the roll.
2. Dig a trench and place Ecolat in it. Preferably place at least 2/3 of the Ecolat in the ground.
3. Drive the Ecopic stakes into the ground with a rubber mallet. The H-profile guarantees high stability. The stakes are approximately 3 cm lower than the upper edge of Ecolat and are invisible once the work is finished. Depending on the type of application, place the stakes at least every 50 cm.
4. Fix Ecolat against the Ecopic stakes with stainless steel screws (2 per stake). A spirit level is a practical tool for a successful result.
5. Fill the side of the border with soil, bark, stones, etc.